hohner

Rig Instrumentation / Sensors for Mud Logging   


Home Email About Us Products Barriers Distributors Custom News

Mud Flow Level Return Sensor / Transmitter (Dragon)

 

The original and only fully certified unit on the market!

 

Stainless steel paddle type flow line sensor that uses an intrinsically safe Ex ia IIC (Zone 0) 10 bit absolute encoder to monitor the movement of the paddle.  2 wire 4...20mA output.

DLS-00X

 

  IECEx


Hook Load / Dead Line Sensor (Pit Bull)

 

Hook Load Sensor with a field replaceable load cell, for cable diameters up to 2.5".  Aluminum and stainless steel construction.  Simple ratchet arm for tightening and calibration.

PTS-00X

 

  IECEx


Mud Pit Level Sensor (Dolphin)

Hohner has now developed it's own ultrasonic mud pit level sensor designed specifically for the mud logging applications.  It's a compact unit at a very lost cost using the latest technology and components - all backed by the Hohner quality.

MPL-00X

 

 IECEx


Hammer Union Pressure Sensor (Ram)

 

Our Hammer Union Pressure Sensor is designed specifically for the oil & gas sector.  It's a compact unit, built with new technology, providing a better price point than the competition.  Wetted parts are Inconel and all flanges are welded shut.  Up to 15,000 psi for 1502 size and 30,000 psi for 2202 size.

HUS-100X (1502)

HUS-200X (2202)

 IECEx


Mud Pump Stroke Counter Kit (Cricket)

 

Sensor kit to monitor the strokes of the mud pump to determine volume of mud going into the well.  Our unit kit comes with a proximity sensor of choice, assembled to our rod and swivel assembly and a large C clamp.

PSC-00X

 

  IECEx


Running Line Tension Sensor (Cirneco)

 

 

Sensor to monitor the tension in a moving cable.   For cable diameters up to 32mm and variable tension limits.  One unit can be configured in seconds, in the field, to accommodate different cable and tension configurations.  With a field replaceable load cell.  Encoders can be added to the pulleys to provide a distance measurement.

RTC-00X

 

  IECEx


Downhole Pressure and General Pressure Sensors (Angler)

 

Range of downhole pressure sensors, absolute and differential

Made out of Inconel and Stainless Steel with 3x burst pressure rating

 

Downhole

3/8" - 24UNF Absolute Pressure Transducer up to 30,000 psi

7/16" - 20UNF Differential Pressure up to 10,000 psi

5/16" -24UNF Differential Pressure up to 8,000 psi 10mm casing

5/16" -24UNF Differential Pressure up to 8,000 psi 15mm casing

 

General

1/2" - 14NPT Pressure Sensor with any connector


Fractional Mud Pump Stroke Counter (Scorpion)

 

 

Brand new patent pending concept

 

Stainless steel sensor provides a 4...20mA signal for the full pushrod movement, giving an absolute position of the pushrod.  Not only does it measure strokes, but it also measures down to 1/256 of a stroke.  A pivot arm is position towards the pushrod, and our spring loaded sensor monitors the rotation equivalent movement of the linear pushrod.

MSC-00X

 

  IECEx


Heave Compensator (Shark)

 

Device used to monitor the vertical displacement of a drill ship relative to the sea, and the data from the drawworks can be compensated accordingly.  This device features up to 15m (45ft) length linear displacement.  Spring loaded, so no pneumatics required.  Any Hohner encoder can be used.

EM90A4

 

  IECEx


Geolograph / Air Line Retriever (Chameleon)

 

 

Pneumatically actuated device to monitor the up/down movement of the travelling block when not possible to attach drawworks encoders directly to rig.  Comes with 100m of thick cable and encoder.  Internal mechanism prevents mis-counts.  Magnetic safety brake built in as standard.  Lightweight construction at under 50 Kg.

CHM-00X

 

 IECEx


Calcimeter

 

Industry standard clear acrylic type calcimeter with a digital pressure sensor and stainless steel relief valve for easy operation.

CAL-00X


DrawWorks Encoders

 

Complete range of encoders designed to be used on Draw Works.  Intrinsically Safe, Ex ia IIC or IIB (Zone 0) and IP66/X7.  Shafts from 5/8" threads up to 2" threads.  Standard hollow shaft available as well.

NAMFPX

 

  IECEx


TopDrive Encoders

 

An extremely heavy duty Top Drive motor encoder, 12 pounds of solid stainless steel in a flame proof Ex d IIC (Zone ) housing.  Electronics can be incremental, absolute or tachometer.

DXE / MXE / RXE

 

  IECEx


Coil Tubing and Wireline Encoders

 

 

A compact range of encoders based on the standard US sizes (2.5" square and round, 2.0" square and round).  Comes with either NAMUR or Voltage electronics.

Intrinsically Safe, Ex ia IIC or IIB (Zone 0)

 

2.5" Solid Shaft - NAMUR  /  Voltage

2.0" Solid Shaft - NAMUR  /  Voltage

2.0" Hollow Shaft - NAMUR  /  Voltage

 

A compact replacement for the TRD type encoder is also available in stainless steel with fully certified and upto date electronics

 

TRD - NAMUR  /  Voltage

 

  IECEx


Tri-axial Inclinometer and Accelerometer (Cerberus)

Triaxial Inclinometer and Accelerometer in one.

 

Stainless steel for up to 16g and +/-60 degrees with 4...20mA or Voltage outputs.

 

INC-00X

NAC-00X (non certified)

 

  IECEx


600 and 100 bar Submersible Encoders (Chimaera)

 

New range of submersible encoder rated down to 600 bar (6,000m) depth.  The standard unit goes down to 100 bar and uses a special shaft seal.  For depths down to 600 bar we use a patent pending magnetic coupling to ensure no moving parts are exposed.

 

Aluminum or stainless steel.

Standard or Intrinsically Safe electronics.

 

100 bar - Incremental / Absolute / Position 4...20mA

 

600 bar - All versions

 

  IECEx


Junction Boxes for Connecting Sensors in Field (Turtle)

 

New range of junction boxes directed at mud logging and rig instrumentation for amalgamating sensor signals in clusters around the rig such as mud pit area.  Hohner can include all contents such as terminal blocks and cable glands.

 

GRP Material

IP68 to 1.5m

ATEX Pending

 

JBP-001

 


Hohner Corp. Tel:  1 905 563 4924 and 1 800 295 5693
5536 Regional Road 81 Fax: 1 905 563 7209
Beamsville, Ontario, L0R 1B3, Canada E-mail: hohner@hohner.com

Hohner Automation Ltd. Tel: +44 (0) 1978 363-888 and 0 845 658 2020
Units 14-16, Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham, North Wales, LL13 8UG, UK E-mail: uksales@hohner.com