hohner

    Hohner Corporation
Home Email Distributors Terms About Us Accessories Download 3D AutoCAD

Series N20S incremental stainless steel 2.0" blind hollow shaft encoder

(round flange shown)

N

2

0 S

X

  

X

X

L

8

X

  

X

/

X

X

X

X
  |

Shaft Size

|

|

 Resolution - ppr

 

 | 10 = 10mm | |

 

 | A5 = 1/2"   |  

  Exit

 

 | Connection     R = Radial

Flange Type

 6 = MS6  

  A = Axial
D = Square 7 = MS7  
E = Round 0 = MS10  
2 = 2m cable  
 
5...24 Volt Extended Line Driver is standard

    IECEx

Zone 0, Class 1 Div 1

 
Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C Cable 2 meters Connector
-   4 ...+ 140 degrees F PS GND Black 1
Max frequency: 100 kHz PS 5...24V Red 2
Weight: 53 oz (1.0 kg) Output A White 3
Protection: IP 66 Output B Blue 4
Housing: Stainless Steel Output O Yellow 5
Shaft: Stainless Steel Output A inv Green 6 (not MS6/7)
Bearings: 2 x 6803 Output B inv Violet 7 (not MS6/7)
Torque: 0.8 oz/in (6 N-cm) Output O inv Brown 8 (not MS6/7)
Shaft load: 5N (500g)  

 
Humidity: Up to 98% permissible
Speed:  4000 rpm
Max. ppr 1024
 
Output for Channels  

 

Diagram is shown clockwise
To use the encoder in a hazardous area, a safety barrier or galvanic isolator has to be used.  Our six channel barrier and isolator work with our encoders.  Isolator Data Sheet
IP 66
ATEX  [Certificate]
IECEx  [Certificate]
CSA [Certificate]
GOST-CU [Certificate]
 
Mounting Instructions
Clamp encoder to shaft and use torque arm to prevent rotation.  Hook up the encoder with the connection as described.  Make sure power supply meets specifications
Dimensions

Hohner Corp. Tel: (905) 563 4924
5536 Regional Road 81 Fax: (905) 563 7209
Beamsville, Ontario E-mail: hohner@hohner.com
Canada L0R 1B3 Web: www.encoderonline.com