|
hohner |
Hohner Automation Ltd. |
| Home | Distributors | Terms | About Us | Accessories | Download 3D AutoCAD |
|
Series TXE stainless steel 'terminal block' encoder (Ex de) |
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Technical Data | Connection Options | |||
| Operating temp: | - 20 ...+ 60 degrees C | Terminal Block | ||
| - 4 ...+ 140 degrees F | PS GND | 1 | ||
| On request: | -40 ... + 60 degrees C | PS 5 ... 24 V | 2 | |
| Max frequency: | 100 kHz | Output A | 3 | |
| Current consumption: | 40 mA (max.) | Output A inv | 4 | |
| Power supply: | 5 - 24V | Output B | 5 | |
| Weight: | 7 Kg | Output B inv | 6 | |
| Protection: | IP 66 / 67 | Output O | 7 | |
| Housing: | Stainless Steel | Output O inv | 8 | |
| Shaft: | Stainless Steel | |||
| Bearings: | 2 x 6001 - (Z) (RS) | Output | ||
| Torque: | 0.8 oz/in (6 N-cm) | Diagram is shown with clockwise shaft rotation viewed from | ||
| Humidity: | Up to 98% permissible |
shaft end |
||
| Speed: | 6000 RPM max. |  |
||
| Shock: | 10g (6msec) | |||
| Vibration: | 5g (500 Hz) | |||
| Shaft load: | Radial / Axial 10 N | |||
| Line driver output max: | 50 mA per channel | |||
| Max. ppr: | 5000 | |||
| Inertia: | 275 gm-cm2 | |||
|
Certifications |
|
Does not require a barrier for use in hazardous areas, it is Flameproof, making the barrier redundant.
The encoder has a built in Exe Terminal Block in the back. This is accessible through the back lid which is secured with 4x M4 screws. User has to comply with all hazardous area procedures in order to open and close the back lid during installation. |
| IP 66/X7 |
| Ex de IIC |
| ATEX [Certificate] |
| IECEx [Certificate] |
| Mounting Instructions |
| Hook up the encoder
with the connections as described. Make sure power supply meets
specifications. Attach encoder to mounting bracket as shown.
Attach shaft using a flexible coupling.
|
| Dimensions (with and without front REO flange) |
|
|
| Hohner Automation Ltd. | Tel: +44 (0) 1978 363-888 |
| Whitegate Industrial Estate | Fax: +44 (0) 1978 364-586 |
| Wrexham LL13 8UG | E-mail: uksales@hohner.com |
| United Kingdom | Web: www.hohneronline.co.uk |
